Explore our export-ready cathodic protection power components, silicon rectifiers, and high-voltage semiconductor blocks customized for French engineering specifications.
20KV 50A high-voltage silicon rectifier stack engineered for heavy industrial RF equipment and high-surge ICCP protection units.
High-reliability 25A TO-220 thyristor module for precision phase-angle switching in automated cathodic protection power supplies.
17.5KV heavy-duty HV silicon stack diode designed for industrial HF induction heating and power transformer rectifiers.
Stud-type ZP100A high-power rectifier diode offering superior thermal dissipation for continuous electroplating and CP power units.
Compact single-phase 1000V 3A bridge rectifier component for power converter boards, auxiliary power units, and control logic.
Original traceable surface-mount general rectifier diode designed for high-density control electronics and telemetry modules.
Fast-recovery transient protection diode providing overvoltage surge clamping for remote CP sensing circuits and data loggers.
Heavy industrial 400VAC input to 180VDC output thyristor rectifier block built for harsh environment power conversion equipment.
Years Power Design
Max HV Power Output
Ultra-Low DC Ripple
EU Quality Compliance
Cathodic Protection (CP) is the primary line of defense against electro-chemical corrosion for vital steel infrastructure across France. From the extensive natural gas transport networks operated by GRTgaz and Teréga, to the massive marine terminals at the Grand Port Maritime de Marseille (GPMM) and HAROPA Port Le Havre, maintaining structural integrity demands continuous, highly precise Direct Current (DC) delivery. As a premier Chinese manufacturer and global exporter of high-reliability transformer rectifiers and cathodic protection power supplies, our systems are engineered to satisfy the rigorous technical standards established by French and European regulatory frameworks.
Cathodic protection power units manufactured in China for deployment in France must contend with extremely diverse geographical and electrical conditions. French soils vary from high-resistivity inland granite and limestone massifs (such as the Massif Central) to ultra-low resistivity saline soils along the Atlantic and Mediterranean coastlines. Our power electronics incorporate multi-tap phase-controlled SCR rectifiers and high-frequency PWM switch-mode topologies capable of delivering regulated current outputs from 5 Amperes up to 1000+ Amperes, with DC output voltages tailored from 10 Volts to 150 Volts.
We supply both oil-cooled heavy-duty SCR transformer rectifiers for severe outdoor locations and rack-mounted, modular air-cooled SMPS units delivering >90% power conversion efficiency.
Equipped with primary and secondary MOV surge arresters, high-surge silicon diodes, and fast recovery rectifiers (e.g., P0080TA-MC series) to survive indirect lightning strikes on rural French pipelines.
Native RS-485 Modbus RTU communication interfaces seamlessly integrate with French SCADA systems, enabling remote potential measurement, automatic ON/OFF instant-off testing, and alarm reporting.
France maintains over 37,000 kilometers of high-pressure natural gas transmission pipelines. Cathodic protection power supplies stationed along rural right-of-ways require high reliability, low maintenance, and total resistance to extreme ambient temperatures. Our custom transformer rectifiers feature oil-immersed (IP65/IP66) construction, preventing internal oxidation from condensation. The inclusion of heavy-duty silicon diodes (such as the ZP100A 1600V spiral diode series) ensures continuous, uninterrupted current injection into deep anode beds even under high continuous loads.
Maritime structures along the North Sea, Atlantic Coast (Brest, Saint-Nazaire), and Mediterranean Sea face severe chloride-induced corrosion. Sheet pile walls, tubular steel dolphins, and monopile foundations for French offshore wind projects require constant current impressed protection systems (ICCP). Our marine-grade cathodic protection rectifiers feature C5-M anti-corrosion cabinet coatings, stainless steel 316L enclosures, and dual-channel automatic voltage/current regulation, preventing over-polarization while protecting splash-zone steelwork.
In accordance with NF EN ISO 12696 (Cathodic protection of steel in concrete), civil engineering contractors in France mandate ultra-precise voltage control for concrete repair on highway bridges, parking structures, and historic monuments. Our multi-channel modular switch-mode power supplies provide independent output control across dozens of isolated titanium ribbon anode zones, maintaining strict potential control to prevent hydrogen embrittlement in prestressed steel tendons.
Selecting the optimal power conversion topology depends heavily on installation environment, target output power, and remote control requirements. The table below details key parameters engineered by our factory for French importers and EPC contractors:
| System Architecture | Primary Topology | Typical Output Range | Ripple Factor | Best Application in France |
|---|---|---|---|---|
| Oil-Cooled SCR Rectifier | Phase-Controlled Thyristor | 10V–100V / 20A–500A | < 3% (Filtered) | Rural gas pipelines, heavy industrial sites, coastal oil terminals |
| Modular Air-Cooled SMPS | High-Frequency PWM (100kHz) | 0V–60V / 5A–100A | < 0.5% RMS | Concrete bridges, urban gas networks, indoor utility plants |
| Solar-Powered DC-DC Converter | MPPT Buck-Boost Converter | 12V–48V / 2A–25A | < 1.0% | Off-grid pipeline test stations in Southern France (Provence/Occitanie) |
| High-Voltage Rectifier Stack | Multi-Diode Silicon Bridge | Up to 20kV / 50A | < 1.5% | Heavy industrial electrolysis, high-voltage ground bed installations |
The French corrosion protection market is undergoing a major technological transition focused on **decarbonization, digitisation, and regulatory compliance**:
As a leading Chinese manufacturer with over three decades of specialized power conversion engineering, we bridge the gap between competitive factory-direct manufacturing costs and rigorous European quality requirements.
Every cathodic protection unit undergoes 100% full-load thermal burn-in testing before dispatch. Products are CE marked with complete Low Voltage Directive (LVD) and EMC compliance documentation.
We build tailored power supplies to exact customer technical datasheets — adjusting input voltage (230V 1-phase, 400V 3-phase, 50Hz), output rating, telemetry protocols, and cabinet colors (RAL codes).
Seamless export logistics with full DDP / DAP delivery options to French industrial hubs including Paris, Lyon, Marseille, Le Havre, Bordeaux, and Lille, including complete customs handling.
Standard model components are dispatched within 5–7 business days. Custom-engineered air-cooled or oil-cooled transformer rectifiers typically feature a manufacturing lead time of 3 to 4 weeks, with express air freight (4–7 days) or sea freight to Marseille/Le Havre (28–32 days).
Yes. All exported power supplies comply with relevant European Directives, including EN 61010-1 (Safety requirements for electrical equipment), EN 61000-6-2/4 (EMC immunity and emissions), and EN 60529 (IP ingress protection rating).
Absolutely. Our smart CP rectifiers feature standardized RS-485 Modbus RTU, 4-20mA analog signal outputs, and optional 4G LTE IoT modems, allowing direct data transmission into local French control networks.
We provide a standard 24-month manufacturer warranty on all complete power units, supported by remote engineering video assistance, complete circuit schematics, and rapid air-express replacement parts delivery.
We manufacture pressurized and explosion-proof enclosures engineered to meet ATEX Zone 1 and Zone 2 requirements for refineries, gas compressor stations, and chemical plants throughout France.
Our units feature high-energy metal oxide varistors (MOVs), isolation transformers with grounded electrostatic shielding, and ultra-fast recovery silicon diodes (such as the HVP-16 and P0080TA series) to divert high-voltage atmospheric surges.
Contact our senior technical sales team today for detailed technical datasheets, CAD drawings, direct factory pricing, and customized cathodic protection power supply designs.
Get a Quote